Digital pattern generator is one of the best electronic test equipment that can be used to generate digital electronics stimuli. This pattern can be either repetitive or single-shot in which case some kind of triggering source is required. The most important purpose of a digital pattern generator is to stimulate the inputs of a digital electronic device. Using this equipment will give you many advantages.
Digital pattern generator generates various kinds of digital pattern signals. A first memory stores an execution signal, an area control signal and a digital pattern. A program counter generates a first address signal in accordance with the execution signal read from the first memory and a first clock signal, and the first memory is addressed by the first address signal. Digital pattern generator will be great for your needs.
Digital pattern generator can produce either repetitive or single-shot signals in which case some kind of triggering source is required. It is used to generate electrical digital signals or patterns to stimulate a device under test. This generator consists of several sections that will explain below.
The first section is a digital section to generate logic level signals. If a programmable level digital pattern generator the output bits are driven by two DACs, one producing the ‘low’ level and the other responsible for the ‘high’ level. Different strategic test cards are available with 16 or 32 bits.
The second section of digital pattern generator is a memory section that used to temporarily store outgoing digital pattern data. To produce digital output signals the pattern information file is transferred from the host PC into the Generator card memory and can then be productivity once, or continuously until stopped. When the information transfer to the card is made when the card is generating this is referred to as the Standard Mode of operation on the Strategic Test cards.
Clearly, the quantity of memory on the card determines the highest period for generation. However, longer signals can be generated if the signal data is constantly transferred while the generation process is ongoing. This method is known as the FIFO Mode or Streaming Mode on the Strategic Test Digital Pattern generator cards.
The third section of digital pattern generator is a bus section that is the electrical interface to the host computer. Its function is to transport commands to the Generator card to set up the card for generation. The bus also transfers the data to be generated from the PC to the card.
The next section of digital pattern generator is a clock part that generates a clock signal that determines the example generation speed. It also generates internal signals for internal bus synchronization and refreshing the onboard memory devices. And the last section is a control section. This is used to control the previous four sections and transfer the data from bus to the onboard memory. Get all benefits of this pattern generator. It will handle all your needs as it comes with the best design to meet your specific needs.
Comments on this entry are closed.